Lenovo ThinkStation P900 Hardware Maintenance Manual Download Page 50

Page: 50 / 218

Note:

Some Lenovo programs might not be displayed in Control Panel. To find these programs, use

Windows Search.

1. Click

Start

➙

Control Panel

. Change the view of Control Panel from Category to Large icons or Small

icons.

2. Locate the program by the icon name and then click the program to launch it.

The following table lists the programs available on the Windows 7 operating system.

Note:

Depending on your computer model, some of the Lenovo programs might not be available.

Table 1. Lenovo programs available on the Windows 7 operating system

Program name

Icon name

Fingerprint Manager Pro or
ThinkVantage Fingerprint Software

Lenovo - Fingerprint Manager Pro or Lenovo - Fingerprint Reader

Lenovo Performance Tuner

ThinkStation Performance

Lenovo Reach

Lenovo SHAREit

Lenovo Solution Center

Lenovo - System Health and Diagnostics

Lenovo ThinkVantage Tools

Lenovo Thinkvantage Tools

Recovery Media

Lenovo - Factory Recovery Disks or Create Recovery Media

Rescue and Recovery

Lenovo - Enhanced Backup and Restore

System Update

Lenovo - Update and Drivers

Accessing Lenovo programs on the Windows 8.1 operating system

If your computer is preinstalled with the Windows 8.1 operating system, you can access Lenovo programs
by doing the following:

Press the Windows key

to go to the Start screen. Click a Lenovo program to launch it. If you cannot find

the program you need, click the arrow icon

in the bottom-left corner of the screen to go to the Apps screen.

Find the desired program in the apps list or search for it in the search box in the top-right corner of the screen.

Depending on your computer model, your computer supports some of the following Lenovo programs:

• Fingerprint Manager Pro or ThinkVantage Fingerprint Software

• Lenovo Companion

• Lenovo Performance Tuner

• Lenovo Reach

• Lenovo SHAREit

• Lenovo Solution Center

• Lenovo Support

• Lenovo Tools

• System Update

An introduction to Lenovo programs

This topic provides a brief introduction to some Lenovo programs.

ThinkStation P900 Hardware Maintenance Manual

Summary of Contents for ThinkStation P900



























































































































































































































Search results

Summary of Contents for ThinkStation P900

Reviews:

Lenovo ThinkStation P900, Hardware Maintenance Manual, Page: 50 / 218

Search results

Summary of Contents for ThinkStation P900

Reviews: