Lenovo ThinkStation P900 Hardware Maintenance Manual Download Page 35

Page: 35 / 218

Chapter 2. Product overview

This chapter provides the following information:

• Locations of connectors

• Locations of components

• Locations of parts on the system board

• Locations of internal drives

• Computer features

• Software programs provided by Lenovo

Locations

This section provides the following topics:

•

“Locating connectors, controls, and indicators on the front of your computer” on page 28

•

“Locating connectors on the rear of your computer” on page 29

•

“Locating components” on page 30

•

“Locating parts on the system board” on page 34

•

“Locating internal drives” on page 35

•

“Locating the machine type and model label” on page 37

Note:

The components in your computer might look slightly different from the illustrations.

Summary of Contents for ThinkStation P900



























































































































































































































Search results

Summary of Contents for ThinkStation P900

Reviews:

Lenovo ThinkStation P900, Hardware Maintenance Manual, Page: 35 / 218

Search results

Summary of Contents for ThinkStation P900

Reviews: