Lenovo ThinkStation P900 Hardware Maintenance Manual Download Page 125

Page: 125 / 218

b. Press the tab

as shown to open the cover of the front-access storage enclosure.

Figure 15. Opening the cover of the front-access storage enclosure

c. Open the handles on both sides of the hard disk drive bracket. Then, pull the bracket out of

the front-access storage enclosure.

• If you are replacing a storage drive, do the following:

a. Remove the front-access storage enclosure from the optical drive bay. See “Removing and

installing a device in an optical drive bay” on page 130.

b. Press the tab

as shown to open the cover of the front-access storage enclosure.

Figure 16. Opening the cover of the front-access storage enclosure

c. Open the handles on both sides of the hard disk drive bracket. Then, pull the bracket with the

storage drive out of the front-access storage enclosure.

d. Remove the storage drive from the bracket. See step 5 on page 113.

6. Install the new storage drive into the storage drive bracket. See step 6 on page 115.

7. Note the orientation of the connector on the storage drive and you might need to turn over the bracket.

Then, slide the bracket with the new storage drive into the front-access storage enclosure until it snaps
into position.

Chapter 11

Installing or replacing hardware

117

Summary of Contents for ThinkStation P900



























































































































































































































Search results

Summary of Contents for ThinkStation P900

Reviews:

Lenovo ThinkStation P900, Hardware Maintenance Manual, Page: 125 / 218

Search results

Summary of Contents for ThinkStation P900

Reviews: