Lenovo ThinkStation 4215, Hardware Maintenance Manual, Page: 76 / 180

Diagnostic Error Code FRU/Action
035-198-XXX
RAID interface test aborted
1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2. Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3. Go to “Undetermined problems” on
page 81.
035-199-XXX
RAID interface test failed, cause unknown
1. See “Undetermined problems” on page
81.
2. Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3. Replace component under function test.
071-000-XXX
Audio port Interface Test Passed
No action
071-00X-XXX
071-01X-XXX
071-02X-XXX
Audio port error
1. Run the Setup Utility program.
2. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
3. System board
071-03X-XXX
Audio port failure
1. Speakers
2. Microphone
3. Audio card, if installed.
4. System board
071-04X-XXX
Audio port failure
1. Run the Setup Utility program.
2. Audio card, if installed.
3. System board
071-195-XXX
Audio port Test aborted by user
Information only
Restart the test, if necessary.
071-196-XXX
Audio port test halt, error threshold exceeded
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
071-197-XXX
Audio port test warning
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2.
Re-run test.
3.
Replace the component that is called out
in warning statement.
4. Replace the component under test.
70
Hardware Maintenance Manual