Lenovo ThinkStation 4215, Hardware Maintenance Manual, Page: 72 / 180

Diagnostic Error Code FRU/Action
018-195-XXX
PCI Card Test aborted by user
1. PCI card
2. Information only
Restart the test, if necessary
018-196-XXX
PCI Card test halt, error threshold exceeded
1.
Press F3 to review the log file
2.
Restart the test to reset the log file
018-197-XXX
PCI Card test warning
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2. Re-run test.
3. Replace the component that is called out
in warning statement.
4. Replace the component under test.
018-198-XXX
PCI Card test aborted
1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2.
Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3. Go to “Undetermined problems” on
page 81.
018-199-XXX
PCI Card test failed, cause unknown
1. Go to “Undetermined problems” on
page 81.
2. Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3.
Replace component under function test.
018-250-XXX
PCI Card Services error
1. PCI card
2. Riser card, if installed.
3. System board
020-000-XXX
PCI Interface Test Passed
No action
020-0XX-XXX
PCI Interface error
1. PCI card
2. Riser card, if installed.
3.
System board
020-195-XXX
PCI Test aborted by user
Information only
Restart the test, if necessary
020-196-XXX
PCI test halt, error threshold exceeded
1.
Press F3 to review the log file.
2. Restart the test to reset the log file.
66
Hardware Maintenance Manual