Lenovo ThinkStation 4215, Hardware Maintenance Manual, Page: 73 / 180

Diagnostic Error Code FRU/Action
020-197-XXX
PCI test warning
1. Make sure the component that is called
out is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2. Re-run test.
3. Replace the component that is called out
in warning statement.
4. Replace the component under test.
020-198-XXX
PCI test aborted
1. If a component is called out, make sure
it is connected and/or enabled. See
Chapter 6, “Using the Setup Utility
program,” on page 49.
2. Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3. Go to “Undetermined problems” on
page 81.
020-199-XXX
PCI test failed, cause unknown
1. Go to “Undetermined problems” on
page 81.
2. Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3. Replace component under function test.
020-262-XXX
PCI system error
1. PCI card
2. Riser card, if installed.
3.
System board
025-000-XXX
IDE interface Test Passed
No action
025-00X-XXX
025-01X-XXX
IDE interface failure
1.
IDE signal cable
2. Check power supply voltages.
3. Reseat IDE signal cable.
4. IDE device
5. System board
025-027-XXX
IDE interface Configuration/Setup error
1. IDE signal cable
2. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
3. Reseat IDE signal cable.
4. IDE device
5. System board
025-02X-XXX
025-03X-XXX
025-04X-XXX
IDE Interface failure
1.
IDE signal cable
2. Check power supply.
3. Reseat IDE signal cable.
4. IDE device
5. System board
025-195-XXX
IDE interface Test aborted by user
Information only
Restart the test, if necessary.
Chapter 8. Symptom-to-FRU Index
67