Lenovo ThinkStation 4215, Hardware Maintenance Manual, Page: 68 / 180

Diagnostic Error Code FRU/Action
006-197-XXX
Diskette interface test warning
1. If a component is called out, make sure
it is connected and/or enabled.
2. Re-run test.
3. Replace the component that is called out
in warning statement.
4.
Replace the component under test.
006-198-XXX
Diskette interface test aborted
1. If a component is called out, make sure
it is connected and/or enabled.
2. Flash the system and re-test. See
“Updating (flashing) the BIOS” on page
167.
3. Go to “Undetermined problems” on
page 81.
006-199-XXX
Diskette interface test failed, cause unknown
1. Go to “Undetermined problems” on
page 81.
2.
Flash the system and re-test.
3.
Replace component under function test.
006-25X-XXX
Diskette interface Error
1. Diskette drive cable
2. Diskette drive
3. System board
011-000-XXX
Serial port Interface Test Passed
No action
011-001-XXX
Serial port Presence
1. Remove external serial device, if
present.
2. Run the Setup Utility program, enable
port.
3.
System board
011-002-XXX
011-003-XXX
Serial port Timeout/Parity error
System board
011-013-XXX
011-014-XXX
Serial port Control Signal/Loopback test
failure
System board
011-015-XXX
Serial port External Loopback failure
1. Wrap plug
2. System board
011-027-XXX
Serial port Configuration/Setup error
1.
run the Setup Utility program, enable
port
2. Flash the system. See “Updating
(flashing) the BIOS” on page 167.
3. System board
011-03X-XXX
011-04X-XXX
Serial port failure
System board
011-195-XXX
Serial port Test aborted by user
Information only
Restart the test, if necessary.
62
Hardware Maintenance Manual