Lenovo ThinkServer User Manual Download Page 75

Page: 75 / 210

Menu item

Selections

Comments

Boot Option #1

•

UEFI Device

• Hard Disk Drive

• Optical Disk Drive

• Removable Device

• Network Device

Set the first startup device.

Boot Option #2

• UEFI Device

•

Hard Disk Drive

• Optical Disk Drive

• Removable Device

• Network Device

Set the second startup device.

Boot Option #3

• UEFI Device

• Hard Disk Drive

•

Optical Disk Drive

• Removable Device

• Network Device

Set the third startup device.

Boot Option #4

• UEFI Device

• Hard Disk Drive

• Optical Disk Drive

•

Removable Device

• Network Device

Set the fourth startup device.

Boot Option #5

• UEFI Device

• Hard Disk Drive

• Optical Disk Drive

• Removable Device

•

Network Device

Set the fifth startup device.

UEFI Boot Device Priority

Varies depending on the available
UEFI devices.

Specify the startup priority for all the
available UEFI devices.

Hard Disk Drive Priority

Varies depending on the available
hard disk drives.

Specify the startup priority for all the
available hard disk drives.

Optical Disk Drive Priority

Varies depending on the available
optical drives.

Specify the startup priority for all the
available optical drives.

Removable Device Priority

Varies depending on the available
removable devices.

Specify the startup priority for all the
available removable devices.

Network Device Priority

Varies depending on the available
network devices.

Specify the startup priority for all the
available network devices.

Quiet Boot

• Disabled

•

Enabled

Enable or disable the quiet boot
feature to determine whether the logo
screen will be displayed or not when
starting the server.

Chapter 5

Configuring the server

Summary of Contents for ThinkServer



















































































































































































































Search results

Summary of Contents for ThinkServer

Reviews:

Related manuals for ThinkServer

Brands by name

Popular brands

Lenovo ThinkServer, User Manual

Search results

Summary of Contents for ThinkServer

Reviews:

Related manuals for ThinkServer

Brands by name

Popular brands