Lenovo ThinkServer, User Manual

Page: 120 / 210

Notes:
1. Use any documentation that comes with the iKVM key and follow those instructions in addition to
the instructions in this topic.
2. If you remove the iKVM key, the iKVM function for server remote management is unavailable.
To remove the iKVM key, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See “Removing the server cover” on page 85.
3. Lay the server on its side for easier operation.
4. Locate the iKVM key on the system board and then lift the iKVM key straight up to remove it from the
iKVM key connector.
Figure 48. Removing the iKVM key
5. If you are instructed to return the old iKVM key, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to “Completing the parts replacement” on page 162.
108
ThinkServer User Guide