Lenovo ThinkServer RD350 User Manual And Hardware Maintenance Manual Download Page 112

Page: 112 / 176

7. Gently press the microprocessor retainer as shown to open it. Ensure that the small handles and the

microprocessor retainer are in the fully open position.

Figure 63. Opening the microprocessor retainer

8. Touch only the edges of the microprocessor and carefully lift it straight up and out of the microprocessor

socket. Place the old microprocessor on a static-protective surface.

Notes:

a. Do not touch the gold contacts on the bottom of the microprocessor.

b. Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be

kept as clean as possible.

Figure 64. Removing the microprocessor

9. Touch the static-protective package that contains the new microprocessor to any unpainted surface on

the outside of the server. Then, remove the new microprocessor from the package.

ThinkServer RD350 User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkServer RD350

















































































































































































Search results

Summary of Contents for ThinkServer RD350

Reviews:

Related manuals for ThinkServer RD350

Brands by name

Popular brands

Lenovo ThinkServer RD350, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD350

Reviews:

Related manuals for ThinkServer RD350

Brands by name

Popular brands