Lenovo ThinkServer RD350 User Manual And Hardware Maintenance Manual Download Page 113

Page: 113 / 176

10. Remove the new microprocessor from the protective cover that protects the gold contacts on the

bottom of the new microprocessor. Do not touch the pins on the microprocessor socket and the gold
contacts on the bottom of the new microprocessor.

Figure 65. Do not touch the pins

11. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align

the notches

on it with the tabs

in the microprocessor socket. Then, carefully lower the new

microprocessor straight down into the microprocessor socket.

Note:

The small triangle

on one corner of the new microprocessor is the microprocessor orientation

indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner

of the microprocessor socket.

Figure 66. Installing the microprocessor

Chapter 6

Replacing hardware

Summary of Contents for ThinkServer RD350

















































































































































































Search results

Summary of Contents for ThinkServer RD350

Reviews:

Related manuals for ThinkServer RD350

Brands by name

Popular brands

Lenovo ThinkServer RD350, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkServer RD350

Reviews:

Related manuals for ThinkServer RD350

Brands by name

Popular brands