Lenovo ThinkPad T430u, User Manual

Page: 103 / 162

• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed memory
• UUID
• MAC address (Internal LAN)
Config menu
If you need to change the configuration of your computer, select Config from the ThinkPad Setup program
main menu.
The following submenu is displayed:
• Network : Set the LAN related functions.
• USB : Enable or disable USB related functions.
• Keyboard/Mouse : Set the keyboard and mouse related functions.
• Display : Specify the settings for display output.
• Power : Set power management related functions.
• Beep and Alarm : Enable or disable the audio related functions.
• Serial ATA (SATA) : Specify the settings for the hard disk drive.
• CPU : Specify the settings for the microprocessor.
Notes:
• The default settings are already optimized for you. If you consider changing the computer configuration,
proceed with extreme caution. Setting the configuration incorrectly might cause unexpected results.
• On each submenu, you can enable a function by selecting Enabled , or disable it by selecting Disabled .
The following table shows the contents of the Config menu.
Notes:
• Some items are displayed on the menu only if the computer supports the corresponding features.
• Default values are in boldface .
Table 4. Config menu items
Menu item Submenu item Selection Comments
Wake On LAN
• Disabled
• AC Only
• AC and Battery
Enables the system to
power on when the Ethernet
controller receives a magic
packet.
If you select AC Only , the
Wake on LAN function is
enabled only when the ac
power adapter is attached.
If you select AC and
Battery , the Wake on LAN
Network
Chapter 7
.
Advanced configuration
87