Lenovo ThinkPad A485, User Manual, Page: 121 / 168

6. To remove the memory module, do the following:
a. Open the film to access the memory module 1 .
b. Open the latches on both sides of the memory slot at the same time
2
.
c. Remove the memory module 3 .
7. To install a new memory module, do the following:
a. Place the notched end of the new memory module toward the contact edge side of the memory slot.
Then insert the memory module into the slot at an angle of about 20 degrees 1 .
b. Pivot the memory module downward until it snaps into place 2 . Ensure that the memory module is
firmly installed in the slot and cannot be moved easily.
c. Close the film to protect the new memory module 3 .
8. Reinstall the base cover assembly and the removable battery.
Chapter 9
.
Replacing devices
103