Lenovo ThinkCentre M800 Hardware Maintenance Manual Download Page 150

Page: 150 / 178

Figure 104. Pivoting the drive bay assembly upward

6. Remove the memory modules. See “Replacing a memory module” on page 120.

7. Remove the PCI card. See “Replacing the PCI card” on page 124.

8. Remove the PCI adapter card. See “Replacing the PCI adapter card” on page 125.

9. Remove the Wi-Fi card. See “Replacing the Wi-Fi card” on page 126.

10. Remove the PCI Express card. See “Replacing a PCI Express card” on page 134.

11. Remove the heat sink and fan assembly. See “Replacing the heat sink and fan assembly” on page 137.

12. Remove the microprocessor. See “Replacing the microprocessor” on page 139.

13. Record the cable routing and cable connections, and then disconnect all cables from the system board.

See “Parts on the system board” on page 35.

142

ThinkCentre M800 and M900 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M800


















































































































































































Search results

Summary of Contents for ThinkCentre M800

Reviews:

Lenovo ThinkCentre M800, Hardware Maintenance Manual, Page: 150 / 178

Search results

Summary of Contents for ThinkCentre M800

Reviews: