Lenovo ThinkCentre M800 Hardware Maintenance Manual Download Page 35

Page: 35 / 178

Chapter 2. Product overview

This chapter provides information about the following topics:

•

“Hardware locations” on page 27

•

“Features” on page 36

•

“Specifications” on page 40

•

“Programs” on page 40

Hardware locations

This section provides information about the locations of your computer hardware.

Note:

The computer hardware might look slightly different from the illustrations.

Front view

Figure 1. Front view

Power button

Storage drive activity indicator

USB 3.0 connector

Microphone connector

Headphone connector

USB 3.0 connector

Card reader slot (some models)

USB 2.0 connectors (2) (some models)

Optical drive activity indicator

Optical drive eject/close button

Summary of Contents for ThinkCentre M800


















































































































































































Search results

Summary of Contents for ThinkCentre M800

Reviews:

Lenovo ThinkCentre M800, Hardware Maintenance Manual, Page: 35 / 178

Search results

Summary of Contents for ThinkCentre M800

Reviews: