manualshive.com logo in svg

Lenovo ThinkCentre M800, Hardware Maintenance Manual, Page: 46 / 178

Share
Download
Lenovo ThinkCentre M800 Hardware Maintenance Manual Download Page 46

• PS/2 mouse connector (available on some models)

• Serial connector

• USB connector

Expansion

• Card reader (available on some models)

• Memory slot

• M.2 card slot

• Optical drive (available on some models)

• PCI Express x1 card slot

• PCI Express card slot (physical link width x16; negotiable link width x4, x1)

• PCI Express x16 graphics card slot

• Storage drive bay

Network features

• Ethernet LAN

– The integrated network interface card supports the Ethernet connector on your computer.

– The discrete network interface card, which is available on some models, provides an additional

Ethernet connector.

• Wireless LAN (available on some models)

• Bluetooth (available on some models)

Security features

For more information, see Chapter 5 “Security” on page 55.

System management features

• Ability to store power-on self-test (POST) hardware test results

• Desktop Management Interface (DMI)

Desktop Management Interface provides a common path for users to access information about all
aspects of a computer. The information includes processor type, installation date, connected printers and
other peripherals, power sources, maintenance history, and so on.

• ErP LPS compliance mode

The energy-related products directive (ErP) lowest power state (LPS) compliance mode reduces the
consumption of electricity when your computer is in sleep or off mode. For more information, see
“Enabling or disabling ErP LPS compliance mode” on page 62.

• Intelligent Cooling Engine (ICE)

The Intelligent Cooling Engine is a system thermal management solution that enables your computer
to run with better thermal and acoustic performance. The ICE function also monitors the thermal
performance of your computer to identify thermal problems. For more information, see “Changing ICE
Performance Mode” on page 62 and “Enabling or disabling the ICE Thermal Alert feature” on page 63.

• Intel

®

Standard Manageability

Intel Standard Manageability is hardware- and firmware-based technology that makes computers easier
and less expensive for businesses to monitor, maintain, update, upgrade, and repair.

38

ThinkCentre M800 and M900 Hardware Maintenance Manual

Summary of Contents for ThinkCentre M800



















































































































































































Reviews:

No comments