Removing or reinstalling the frame stand
Your computer comes with either a frame stand or a lift stand. This section provides instructions on how
to remove or reinstall the frame stand.
To remove or reinstall the frame stand, do the following:
1. Remove all media from the drives and turn off all attached devices and the computer. Then, disconnect
all power cords from electrical outlets and disconnect all cables that are connected to the computer.
2. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently lay
it down so that the screen is against the surface and the cover is facing up.
3. Loose the four screws
1
that secure the frame stand.
Note:
Do not try to remove the four screws, because they are integrated parts of the frame stand.
Figure 5. Removing the frame stand
4. Lift the frame stand off the computer and put it in a safe place.
5. To reinstall the frame stand, position the frame stand so that the four screw holes align with those in the
computer wall mount and then tighten the four screws
1
to secure the frame stand.
6. Go to “Completing the parts replacement” on page 113.
72
ThinkCentre Hardware Maintenance Manual
Summary of Contents for ThinkCentre 7570
