Lenovo ThinkAgile VX3720 7Y12, User Manual

Page: 62 / 102

• The Lenovo XClarity Controller web interface shows a system fan alert.
• The Lenovo XClarity Administrator web console shows a system fan alert.
• The Lenovo XClarity Integrator console shows a system fan alert.
Remove a fan
Use this information to remove a fan in the enclosure.
“ Read the
installation
Guidelines” on
page 47
“ ATTENTION:
Static Sensitive Device
Ground package before opening”
on page 49
To avoid possible danger, read and follow the following safety statement.
• S017
CAUTION:
Hazardous moving fan blades nearby.
• S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted
with metal, which might result in spattered metal, burns, or both.
Before removing a fan:
1. Remove the fan cover (see Remove the fan cover ).
Attention: Static electricity that is released to internal solution components when the solution is
powered-on might cause the solution to halt, which might result in the loss of data. To avoid this
potential problem, always use an electrostatic-discharge wrist strap or other grounding system when
you work inside the solution with the power on.
Note: Replace the failed fan and reinstall the fan cover in 3 minutes.
2. Identify the failed fan. The following illustration shows locations of fan fault LEDs. When the LED is lit, it
indicates the fan is having problems.
58
ThinkAgile VX Enclosure ThinkAgile VX3720 User’s Guide