Lenovo ThinkAgile VX3720 7Y12, User Manual

Page: 22 / 102

Table 9. Components on x16 shuttle
1
10Gb 8-port EIOM cage (SFP+)
6
Power supply 2
2
10Gb 8-port EIOM cage (RJ45)
7
Power supply 1
3
10Gb 8-port EIOM cage filler
8
System Management Module
4
PCIe slot 3
9
PCIe slot 2
5
PCIe slot 1
10
PCIe slot 4
Note: Make sure the power cord is properly connected to every power supply unit installed.
System Management Module (SMM)
The following section includes information about the connectors and LEDs on the rear of the System
Management Module (SMM).
Figure 11. Rear view - SMM
Table 10. SMM
1
Reset pinhole
5
System error LED (yellow)
2
USB port service mode button
6
Identification LED (blue)
3
Ethernet connector
7
Status LED (green)
4
USB connector
8
System power LED (green)
You can access the dedicated XCC network port of the four nodes via the Ethernet connector on the SMM.
Go to SMM website and use IP to access XCC. For more details, see
System Management Module User's
Guide .
The following four LEDs on the SMM provide information about SMM operating status.
5 System error LED (yellow):
When this LED is lit, it indicates that a system error has occurred. Check the event log for additional
information.
6 Identification LED (blue):
This LED could be lit to determine the physical location the specific enclosure in which the SMM is installed.
Use the following commands to control the identification LED and locate the enclosure.
• Turn on:
ipmitool.exe -I lanplus -H <SMM’s IP> -U USERID -P PASSW0RD raw 0x32 0x97 0x01 0x01
18
ThinkAgile VX Enclosure ThinkAgile VX3720 User’s Guide