Lenovo RackSwitch G8264, Command Reference Manual

Page: 583 / 794

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
583
IGMP Filtering Configuration
The following table describes the commands used to configure an IGMP filter.
IGMP Filter Definition
The following table describes the commands used to define an IGMP filter.
Table 313.
IGMP Filtering Configuration Options
Command Syntax and Usage
ip igmp profile
<1 ‐ 16>
Configures the IGMP filter. To view command options, see page 583 .
Command mode: Global configuration
[no] ip igmp filtering
Enables or disables IGMP filtering globally.
Command mode: Global configuration
show ip igmp filtering
Displays the current IGMP Filtering parameters.
Command mode: All
Table 314.
IGMP Filter Definition Options
Command Syntax and Usage
ip igmp profile
<1 ‐ 16>
action {allow|deny}
Allows or denies multicast traffic for the IP multicast addresses specified.
The default action is
deny
.
Command mode: Global configuration
[no] ip igmp profile
<1 ‐ 16>
enable
Enables or disables this IGMP filter.
Command mode: Global configuration
ip igmp profile
<1 ‐ 16>
range
<IP address 1> <IP address 2>
Configures the range of IP multicast addresses for this filter.
Command mode: Global configuration
no ip igmp profile
<1 ‐ 16>
Deletes this filter’s parameter definitions.
Command mode: Global configuration
show ip igmp profile
<1 ‐ 16>
Displays the current IGMP filter.
Command mode: All