Lenovo RackSwitch G8264, Command Reference Manual

Page: 251 / 794

© Copyright Lenovo 2017 Chapter 3: Statistics Commands
251
show ip rip counters
Displays Routing Information Protocol (RIP) statistics. See page 287 for
sample output.
Command mode: All
show ip route counters
Displays IPv4 route statistics. See page 261 for sample output.
Command mode: All
show ipv6 route counters
Displays IPv6 route statistics. See page 262 for sample output.
Command mode: All
show ip slp counters
Displays Service Location Protocol (SLP) statistics.
Command mode : All
show ip tcp counters
Displays Transmission Control Protocol (TCP) statistics. See page 267 for
sample output.
Command mode: All
show ip tenant
<tenant ID (1 ‐ 30)>
info
Displays tenant statistics.
Command mode : All
show ip udp counters
Displays User Datagram Protocol (UDP) statistics. See page 269 for sample
output.
Command mode: All
show ip vrrp counters
When virtual routers are configured, you can display the protocol statistics for
Virtual Router Redundancy Protocol (VRRP). See page 285 for sample output.
Command mode: All
show layer3 counters
Dumps all Layer 3 statistics. Use this command to gather data for tuning and
debugging switch performance. If you want to capture dump data to a file, set
your communication software on your workstation to capture session data
prior to issuing the dump command.
Command mode: All
clear ip arp counters
Clears Address Resolution Protocol (ARP) statistics.
Command mode: Privileged EXEC
Table 110.
Layer 3 Statistics Commands (continued)
Command Syntax and Usage