Lenovo RackSwitch G8264, Command Reference Manual

Page: 587 / 794

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
587
ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
max ­ response
<1 ‐ 256>
Configures the maximum time, in tenths of a second, allowed before
responding to a Membership Query message.
The default value is
100
.
By varying the Query Response Interval, an administrator may tune the
burstiness of IGMP messages on the subnet; larger values make the traffic less
bursty, as host responses are spread out over a larger interval.
Command mode: Global configuration
no ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
max ­ response
Resets the maximum time allowed before responding to a Membership Query
message to its default value of
100
.
Command mode: Global configuration
ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
query ­ interval
<1 ‐ 608>
Configures the interval between IGMP Query broadcasts.
The default value is
125
seconds.
Command mode: Global configuration
no ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
query ­ interval
Resets the interval between IGMP Query broadcasts to its default value of
125
seconds.
Command mode: Global configuration
ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
robustness
<1 ‐ 10>
Configures the IGMP Robustness variable, which is the number of times that
the switch sends each IGMP message.
The default value is
2
.
Command mode: Global configuration
no ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
robustness
Resets the IGMP Robustness variable to its default value of
2
.
Command mode: Global configuration
ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
source ­ ip
<IP address>
Configures the IGMP source IP address for the selected VLAN.
Command mode: Global configuration
no ip igmp querier vlan
<VLAN ID (1 ‐ 4094)>
source ­ ip
Removes the configured IGMP source IP address for the specified VLAN.
Command mode: Global configuration
Table 317.
IGMP Querier Configuration Options (continued)
Command Syntax and Usage