Lenovo RackSwitch G8264, Command Reference Manual

Page: 187 / 794

© Copyright Lenovo 2017 Chapter 2: Information Commands
187
Port Information
The following command displays UFP port information:
show ufp information port
Command mode : All
Port information includes the following for each physical port:
 Port alias
 Port number
 UFP state
 Number of virtual ports enabled
 Link status on each channel (up, down, mismatch or disabled)
CDCP Information
The following command displays S ‐ Channel Discovery and Configuration
Protocol information:
show ufp information cdcp
Command mode : All
CDCP information includes the following for each physical port:
 Whether there is a channel set up
 CDCP communication status for active channels
Alias Port state vPorts link up link down mismatch disabled
­­­­­­ ­­­­­ ­­­­­­ ­­­­­­­ ­­­­­­­­ ­­­­­­­­­­ ­­­­­­­­­ ­­­­­­­­
17 17 ena 2 2 3
18 18 dis 0
19 19 ena 2 2 3
20 20 ena 1 3
21 21 dis 2
22 22 ena 2 2 3
1 : Channel Request
2 : Channel Request
3 : TxSVIDs
4 : TxSVIDs
5 : Disable
6 : Disable
7 : Disable
8 : Disable
9 : Disable
10 : Disable
...