Lenovo RackSwitch G8264, Command Reference Manual

Page: 544 / 794

544
G8264 Command Reference for ENOS 8.4
Open Shortest Path First Version 3 Configuration
The following table describes the OSPFv3 commands.
Table 288.
OSPFv3 Configuration Options
Command Syntax and Usage
[no] ipv6 router ospf
Enter OSPFv3 configuration mode.
Command mode : Global configuration
abr ­ type [standard|cisco|ibm]
Configures the Area Border Router (ABR) type, as follows:

Standard

Cisco

IBM
The default setting is
standard
.
Command mode : Router OSPF3
no abr ­ type
Resets the Area Border Router (ABR) type to its default value ‐
standard
.
Command mode: Router OSPF3
as ­ external lsdb ­ limit
<LSDB limit (0 ‐ 2147483647, ‐ 1 for no limit)>
Sets the link state database limit.
The default value is
­ 1
.
Command mode : Router OSPF3
[no] enable
Enables or disables OSPFv3 on the switch.
Command mode : Router OSPF3
exit ­ overflow ­ interval
<0 ‐ 4294967295>
Configures the number of seconds that a router takes to exit Overflow State.
The default value is
0
.
Command mode : Router OSPF3