Hardware Maintenance Manual
58
Replacing the mouse
Attention
Do not remove the computer cover or attempt any repair before
reading the “Important safety information” in the
Safety and Warranty
Guide
that was included with your computer or in the
Hardware
Maintenance Manual
(HMM) for the computer. To obtain copies of
the
Safety and Warranty Guide
or
HMM
, go to the Support Web site at:
http://consumersupport.lenovo.com.
To replace the mouse:
1. Remove any media (diskettes, CDs, or memory cards) from the drives,
shut down the operating system, and turn off all attached devices and
the computer.
2. Unplug all power cords from electrical outlets.
3. Locate the connector for the mouse. Refer to “Left and right view” and
“Rear view”.
Note
Your mouse is connected to the USB connector at either side or the
rear of the computer.
4. Disconnect the failing mouse cable from the computer and connect
the new mouse cable to the same connector.
