Lenovo 3376, Maintenance Manual

Page: 95 / 174

To replace the primary hard disk drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 81.
3. Locate the primary hard disk drive. See “Locating internal drives” on page 73.
Note: There is also a secondary hard disk drive bay for you to purchase and install a secondary hard
disk drive by yourself. If you want to install a secondary hard disk drive, use the same way of installing
the primary hard disk drive.
4. Disconnect the signal cable and the power cable from the hard disk drive.
5. Remove the four screws that secure the hard disk drive. Then, slide the hard disk drive out of the chassis.
8
7
6
5
3
4
Figure 22. Removing the primary hard disk drive
Chapter 9
.
Replacing FRUs (machine types: 3376, 3378, and 3387)
91