Lenovo 3376, Maintenance Manual

Page: 135 / 174

This section provides instructions on how to install or replace the optical drive.
Note: The optical drive is available only in some models.
To install or replace an optical drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 119.
3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 120.
4. Pivot the drive bay assembly upward. See “Accessing the system board components and drives” on
page 122.
5. Disconnect the signal cable and the power cable from the optical drive.
6. Hold the optical drive and remove the two screws that secure the optical drive.
Figure 70. Removing the optical drive
Chapter 10
.
Replacing FRUs (machine types: 3377, 3386, and 3388)
131