2. Remove the server cover. See “Removing the server cover” on page 23.
3. Lay the server on its side for easier operation.
4. Touch the static-protective package that contains the 9240-8i RAID 5 key to any unpainted surface on
the outside of the server. Then, remove the 9240-8i RAID 5 key from the package.
5. Install the 9240-8i RAID 5 key to the ThinkServer 9240-8i RAID 0/1 Adapter, as shown:
Figure 48. Installing the 9240-8i RAID 5 key
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 90. Then, refer to Chapter
6 “Configuring the server” on page 95 for information about RAID configuration.
Removing the 9240-8i RAID 5 key
Attention:
Do not open your server or attempt any repair before reading and understanding the
Safety Information
and the
Warranty and Support Information
on the
ThinkServer Documentation DVD
that came with your product, and
“Guidelines” on page 21. To obtain a copy of the publications, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove the 9240-8i RAID 5 key from the ThinkServer 9240-8i
RAID 0/1 Adapter. If you remove the 9240-8i RAID 5 key, the RAID 5 configuration function of the
ThinkServer 9240-8i RAID 0/1 Adapter becomes unavailable. However, the RAID 5 configuration function
of the onboard SATA RAID is still available if you have installed the RAID 5 Key on the system board. See
“Installing the RAID 5 key” on page 58.
To remove the 9240-8i RAID 5 key, do the following:
Attention:
Electrostatic discharge (ESD) can damage the 9240-8i RAID 5 key. Always ground yourself and
use a ground strap before touching the option. Perform the following procedure at an ESD-safe workstation.
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. Remove the server cover. See “Removing the server cover” on page 23.
3. Lay the server on its side for easier operation.
Chapter 5
.
Installing, removing, or replacing hardware
61
Summary of Contents for 102912U
