INNOV@-pCO1-IOM-0907-E
39
The following protocols are used to ensure connectivity to the other systems:
- Carel proprietary
(with HiNet supervision system, N = 200)
- Modbus
(with gateway for Basic Control, N = 16; integrated for Advanced Control, N = )
- Bacnet
(with gateway, N = 8)
- TCP/IP
(with web-gate, N = 16)
- Echelon LonWorks
(only with Advanced Control)
- Trend
(only with Advanced Control)
- OPC standard
(OLE for Process Control). This allows a simple integration to SCADA OPC Client Systems.
[ SCADA =Supervisory Control And Data Acquisition ]
9.2 Gsm protocol
By selecting the GSM protocol, SMS (text) messages can be sent to and from GSM phones, using a GSM
modem. The pCO1 sends a message to the phone in the event of alarms, and can receive messages from
the telephone at any time; the user can in fact use a GSM phone to modify some of the unit's parameters, as
listed below:
Parameter
Unit Add. 1
Unit Add. 2
Unit Add. 3
Unit Add. 4
Unit Add. 5
Unit Add. 6
Unit Add. 7
Unit Add. 8
Temperature set point
analogue 1
analogue 10
analogue 19
analogue 28
analogue 37
analogue 46
analogue 55
analogue 64
Humidity set point
analogue 2
analogue 11
analogue 20
analogue 29
analogue 38
analogue 47
analogue 56
analogue 65
2Recovery set point
analogue 3
analogue 12
analogue 21
analogue 30
analogue 39
analogue 48
analogue 57
analogue 66
Compensation set point
analogue 4
analogue 13
analogue 22
analogue 31
analogue 40
analogue 49
analogue 58
analogue 67
Low temperature alarm
threshold offset
analogue 5
analogue 14
analogue 23
analogue 32
analogue 41
analogue 50
analogue 59
analogue 68
High temperature alarm
threshold offset
analogue 6
analogue 15
analogue 24
analogue 33
analogue 42
analogue 51
analogue 60
analogue 69
Low humidity alarm
threshold offset
analogue 7
analogue 16
analogue 25
analogue 34
analogue 43
analogue 52
analogue 61
analogue 70
High humidity threshold offset
analogue 8
analogue 17
analogue 26
analogue 35
analogue 44
analogue 53
analogue 62
analogue 71
Outlet air limit set point
analogue 9
analogue 18
analogue 27
analogue 36
analogue 45
analogue 54
analogue 63
analogue 72
Unit On-off
digital 1
digital 2
digital 3
digital 4
digital 5
digital 6
digital 7
digital 8
N.B. When the GSM protocol is active, the remote supervisor cannot call the pCO1 board.