- 1 -
LADDER ASSEMBLY INSTRUCTION MANUAL
(Note: Ladder for 8ft, 10ft and 12ft trampoline is with two steps, for 14ft
trampoline is with three steps.)
Step1:
Take all ladder parts out of the box, list them like the above first picture.
Firstly, insert one steel tube with hook into the hole of plastic plate, the steel
tube’s hook need to face inside and the plastic plate should be with mesh
upwards. (Note: The plastic plate is not flat, you need to keep the lower side of
plastic plate towards outside and keep the higher side of plastic plate towards
inside.) Then move the plastic plate to the top in accordance with the small hole
of steel tube.
Step2:
Insert another steel tube into the another end of plastic plate’s hole. Keep
the hole of plastic plate in align with the steel tube’s hole. And then use one allen
key to tighten it with screws and bolts.
