Control unit with touch panel
42
PROVIDO Ref. 10732418 / Version 03
PROVIDO Ref. 10732418 / Version 03 43
9.3.1 User Setting Protection
To avoid unauthorized or accidental changes of user settings, each
user setting can be protected by a password/PIN. This keeps the
working parameters identical each time you load a protected user
setting. Changes can be done during the application, but will not be
stored unless "Save as Current" or "Saved as new" with entering the
correct password/PIN.
Saving and protecting the user settings is done in two ways:
As a current user setting
You will receive a prompt for the password/PIN.
X
If a password/PIN was defined save the changes of the user
settings with entering the correct password/PIN.
If it is incorrect the system will go back to "Start values main".
X
Choose "Save as current" and enter the password/PIN again.
If no password/PIN was defined, you can define a password/PIN
(4-10 characters).
X
Press "OK" for re-entering and confirmation.
If the re-entered password/PIN does not match the enter/re-enter
process has to be repeated.
If no password/PIN should be defined, you can exit the procedure
by pressing "Skip" or before re-entering with "Cancel".
As a new user setting
You will receive a screen message and a prompt for the password/
PIN after entering the name of the user setting. If the settings
should be protected:
X
Enter a password/PIN (4-10 characters) and press "OK" for
re-entering and confirmation.
If no password/PIN should be defined you can exit the procedure by
pressing "Skip" or before re-entering with "Cancel".
If the re-entered password/PIN does not match the enter/re-enter
process has to be repeated.
The protection of a user setting by a password/PIN is indicated by
"(locked)" right after the user setting name on the GUI main page
or by a lock icon in front of the user setting name in the Select User
page.
Changing password
X
Select a user and click the "Change Password" button.
X
Follow the instructions on the screen.