background image

Preparation before surgery

28 

PROVIDO Ref. 10732418 / Version 03

 

PROVIDO Ref. 10732418 / Version 03 29

564

1196

30

°

625

96

9

7.8  Attaching sterile controls and 

drape

WARNING
Risk of infection.

 

X

Always use the PROVIDO with sterile controls and a 
sterile drape.

7.8.1  Covers for rotary buttons

Use the covers also when you use sterile disposable drapes. 
The controls will be easier to grasp.

 

X

Fit steam-sterilizable covers on the magnification, working 
distance and AutoIris manual override knobs.

 

X

Attach steam-sterilizable covers to accessories as well (if 
present).

7.8.2  Sterile drape for stand

•  Only use the sterile Leica tested drapes specified in the 

Accessories section.

•  Drape only as far as the arm system (see picture below). 

CAUTION
Risk of infection.

 

X

Leave sufficient space around the stand to ensure that 
the sterile drape does not come into contact with non-
sterile components.

 

X

Activate the "All Brakes" function on the handle and extend the 
arm system.

 

X

Put on sterile gloves.

 

X

 Attach all the sterile controls.

 

X

Unpack the sterile drape carefully and drape it over the 

Summary of Contents for PROVIDO













































































Reviews: