Leica LMT260 XY, User Manual

Page: 20 / 42

Leica LMT260 XY Scanning Stage User Manual Assembly 20
Remove the glass stage plate
1. Press the glass stage plate downward as
shown.
2. Remove the glass stage plate.
This chapter shows an example of
assembly of the Leica LMT260 XY scan-
ning stage on a transmitted light base. Images
and descriptions may vary when using another
transmitted light base.
The Leica LMT260 XY scanning stage is a
precision instrument. During installation,
avoid subjecting the stage to impact or severe
vibrations.
Remove the standard stage
1. Loosen and remove the four Allen screws
with a 3 mm Allen key.
2. Remove the standard stage.
Install the adapter
1. Position the adapter exactly.
2. Fasten the adapter with four M4x35 Allen
screws using a 3 mm Allen key.
Glass Stage Plate and Adapters
Leica LMT260 XY Scanning Stage with Leica TL4000 Series (BFDF, RC, RCI)
1
1
1
1
2
SW 3
1
2
2
2
2
SW 3
1
2