Leica LMT260 XY, User Manual

Page: 21 / 42

Leica LMT260 XY Scanning Stage User Manual Assembly 21
Remove the transport anchor
1 . Remove the transport anchor screws.
Secure the axes with your fingers for
the following steps, so as not to jam the
axes by the movements of the Leica LMT260 XY
scanning stage.
Keep the safety screws; they are needed
for retransporting the stage. Do not
transport the stage without first installing the
safety screws.
Mount the Leica LMT260 XY scanning stage
1. Place the Leica LMT260 XY scanning stage
to fit precisely on the adapter.
2. Gently tighten both front M4x12 Allen
screws with a 3 mm Allen key.
3. Gently tighten both rear M4x12 Allen
screws with a 3 mm Allen key.
4. To guarantee a high level of precision for
the stage, tighten the four screws crosswise
exactly 1.6 Nm using a torque wrench.
Mount the glass stage plate (optional)
1. Mount the glass stage plate (optional)
or the Leica Live on Stage sample holder
(optional) as shown.
Leica LMT260 XY Scanning Stage
1
2
2
3
3
1.6 Nm
SW 3
1
1
1