Leica LMT260 XY, User Manual

Page: 23 / 42

Leica LMT260 XY Scanning Stage User Manual Installation 23
Leica LMT260 XY scanning stage, HydraDT control unit and CAN handwheel
1. Connect the CAN handwheel via the CAN connection to the CAN1
port of the HydraDT control unit using a CAN cable.
2. Connect the Leica LMT260 XY scanning stage to the corresponding
port of the HydraDT control unit using a Motor X+Y cable.
3. Connect the Leica LMT260 XY scanning stage to the corresponding
HDMI ports of the HydraDT control unit using the HDMI cables (sensor
X and sensor Y).
4. To control the Leica LMT260 XY scanning stage using software,
connect the USB cable to the corresponding port of the HydraDT
control unit and the computer.
5. Connect the power cord to the corresponding port of the HydraDT
control unit.
6. Connect the power cable to a grounded socket.
The Leica LMT260 XY scanning stage and the HydraDT control unit
are matched to ensure the best possible performance. Using the
serial number of the Leica LMT260 XY scanning stage and the adhesive
label on the rear side of the HydraDT control unit you can check whether
the two instruments are compatible.
2
1
3
4
5
6
3
1
Cables and Terminals