Leica LMT260 XY, User Manual

Page: 30 / 42

Leica LMT260 XY Scanning Stage User Manual Instrument Setup 30
Operating using the HydraDT control unit
Saving a position of the Leica LMT260 XY scan-
ning stage on one of the push buttons 2-6.
1. Approach the desired position.
2. Press the desired push button for more
than three seconds:
O
The corresponding coordinates (X and Y)
are saved.
O
A successful save is indicated by the corre-
sponding status display flashing three
times.
Saved coordinates are retained until
overwritten by another save operation.
The saved coordinates are the target
coordinates of the last motorized move-
ment. If the stage is unlocked during the save,
what is saved is not the current position, but
instead the last position approached with the
motor!
1 2 3 4 5 6
1 Push button 1
To approach the zero position (center position)
2 Push button 3
To approach or save position 1
3 Push button 4
To approach or save position 2
4 Push button 5
To approach or save position 3
5 Push button 6
To approach or save position 4
6 Push button 2
To approach or save position 5
Five positions can be saved with push
buttons 2 to 6. These positions are not
identical with the saved positions that can be
saved via the LAS or LAS AF software.
Functions of the push buttons