Leica LMT260 XY, User Manual

Page: 31 / 42

Leica LMT260 XY Scanning Stage User Manual Instrument Setup 31
Function of status displays 1-8:
O
Status displays 3-7 are assigned to savable
positions 1-5 or push buttons 2-6.
O
Status displays 1-8 illuminate continuously
as soon as the Leica LMT260 XY scanning
stage is ready to operate.
O
If the corresponding push button for saving
a position is pressed for more than three
seconds, the LED goes out briefly.
O
A successful save is indicated by the corre-
sponding LED flashing three times.
O
If the corresponding push button is pressed
briefly (less than three seconds), the LED
flashes once and the last-saved position is
approached. No new position is saved.
Operating using the HydraDT control unit, continued
1 2 3 4 5 6 7 8
Status displays
1 Status display 1
LED on: X-axis fixed
LED off: X-axis free
2 Status display 2
LED on: Y-axis fixed
LED off: Y-axis free
3 Status display 3
saved position 1/push button 3
4 Status display 4
saved position 2/push button 4
5 Status display 5
saved position 3/push button 5
6 Status display 6
saved position 4/push button 6
7 Status display 7
saved position 5/push button 2
8 Status display 8
LED lights up and stays green: Operating
voltage is present