Leica LMT260 XY, User Manual

Page: 29 / 42

Leica LMT260 XY Scanning Stage User Manual Instrument Setup 29
1. If the LED is lit: Press the push button;
the Leica LMT260 XY scanning stage can
be moved freely; the CAN handwheel,
HydraDT control unit and software will not
function, and the LED flashes.
2. Now the Leica LMT260 XY scanning stage
can be carefully moved by hand.
3. Press the button again to refasten the Leica
LMT260 XY scanning stage and to control
using the CAN handwheel, HydraDT or
software again; the LED lights up and stays
green.
Operating using the CAN handwheel
1. Press the toggle switch forward or back-
ward for more than 0.25 seconds to switch
between the minimum and maximum
speeds of the Leica LMT260 XY scanning
stage.
2. Move the Leica LMT260 XY scanning stage
in the X direction.
3. Move the Leica LMT260 XY scanning stage
in the Y direction.
For additional information about the
minimum or maximum speeds, please
refer to page 38.
Moving the Leica LMT260 XY scanning stage by hand
The green LED of the push button indicates:
O
LED off: No power supply or stage is initia-
lizing (approx. 30 seconds).
O
LED flashes continuously: One or both axes
can be moved freely.
O
LED is lit continuously: Leica LMT260 XY
scanning stage is ready to operate for
monitoring by means of software, CAN
handwheel or HydraDT control unit.
2
1
1
1
3
2