Managing, Creating, Editing Points/Data
19
)
or
. Available for local coordinates. Changes
between the ellipsoidal and the orthometric height.
4.
changes to the Code page.
5.
MANAGE New Point, Code page
The setting for Thematc Codes in CONFIGURE Coding determines the availability of
the subsequent fields and softkeys.
•
For Thematc Codes: With Codelist:
The codes from the job codelist are used.
Point Code. All point codes of the job codelist can be selected.
The description of the code is shown as an output field.
The attributes are shown as output, input or choicelist fields depending on
their definition.
•
For Thematc Codes: Without Codelist:
Codes for points can be typed in but not selected from a codelist.
Code. The code to be stored with the point. A check is performed to see if a
point code of this name already exists in the job. If so, the according attributes
are shown. Attribute n. Up to four attribute values are available.
6.
Is Thematc Codes: With Codelist?
•
If yes, continue with the next row.
•
If no, continue with step 7.
)
allows additional attributes to be created for this point code.
Step
Description
Summary of Contents for GPS900 Series
