Leica GPS900 Series Technical Reference Manual Download Page 236

Page: 236 / 287

Working with Setup Reference

GPS900

236

31.3

Using the Program

Step 1)
selecting the antenna

CONT

(F1)

To accept the screen entries and continue.

SRCH

(F4)

To search for all available Bluetooth devices.
If more than one Bluetooth device is found a
list of available devices is provided.

Field

Description of Field

Antenna

Antennas in the RX900 System RAM.

ID Address

The type of antenna to be used. This is fixed.

Device

The ID address of the ATX900 to be used. This is fixed.

Summary of Contents for GPS900 Series
































































































































































































































































































Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands

Leica GPS900 Series, Technical Reference Manual

Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands