Leica GPS900 Series Technical Reference Manual Download Page 158

Page: 158 / 287

Understanding HOT Keys, USER key, STATUS Key

GPS900

158

The data being received from the satellites and the layout of the screen depend on the
active real-time data format.

SAT+

(F3)

To display information about the satellite with the next larger PRN.

Field

Description of Field

Sat PRN

The PRN number of the satellites.

Sat Time

The GPS time of the satellite.

Phase L1, Phase L2

The number of phase cycles from the antenna to the satellite on L1
and L2.

Code L1, Code L2

The pseudorange between the antenna to the satellite for L1 and L2.

Softkey

Description of Softkey

Summary of Contents for GPS900 Series
































































































































































































































































































Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands

Leica GPS900 Series, Technical Reference Manual

Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands