Leica GPS900 Series, Technical Reference Manual

Page: 127 / 287

Using the Tools - Calculating with Calculator GPS900 127
(F2) : To calculate cosine of X.
(F3) : To calculate tangent of X.
(F4) : To calculate arcsine of X.
(F5) : To calculate arccosine of X.
(F6) : To calculate arctangent of X.
Level 4 (press to access the next level).
(F1) : To convert decimal degrees into dd.mm.ss.
(F2) : To convert dd.mm.ss into decimal degrees.
(F3) : To insert X: 3.1415926536. The number of decimals depends on
the selection for Display Dec in TOOLS Calculator Configuration.
(F4) : This softkey is blank.
(F5) : To convert degrees into radians.
(F6) : To convert radians into degrees.
Level 5 (press to access the next level).
(F1) : Conversion of rectangular coordinates into polar coordinates. The
y coordinate must be visible in Y and the x coordinate in X when
pressing this key. The angle is displayed in Y and the distance in X.
(F2) : Conversion of polar coordinates into rectangular coordinates. The
angle must be visible in Y and the distance in X when pressing this
key. The y coordinate is displayed in Y, the x coordinate in X.
Softkey Description of Softkey