Leica GPS900 Series Technical Reference Manual Download Page 102

Page: 102 / 287

Configuring the Local Time Zone

GPS900

102

Configuring the Local Time Zone

Description

The settings on this screen help RX900 to quickly locate and track satellites.

Access

Configuring

CONT

(F1)

To accept the screen entries and continue.

Field

Description of Field

Time Zone

•

From -13:00 to +13:00. The time zone for the current location
and local date.

Local Time

•

Setting the local time supports a very fast satellite acquisition.

Local Date

•

Setting the local date supports a very fast satellite acquisition.

Summary of Contents for GPS900 Series
































































































































































































































































































Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands

Leica GPS900 Series, Technical Reference Manual

Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands