Leica GPS900 Series Technical Reference Manual Download Page 194

Page: 194 / 287

Working with Determine Coord System

GPS900

194

Step 3)
matching the points

CALC

(F1)

To confirm the selections, compute the
transformation and continue with the next
screen.

NEW

(F2)

To match a new pair of points. This pair is
added to the list.

EDIT

(F3)

To edit the highlighted pair of matched
points.

DEL

(F4)

To delete the highlighted pair of matched
points.

MATCH

(F5)

To change the type of match for a high-
lighted pair of matched points.

AUTO

(F6)

To scan both jobs for points that have the
same point ID. Points with matching point
ID’s are added to the list.

Column

Description of Column

WGS84 Pts

The point ID of the points chosen from WGS84 Pts Job.

Local Pts

The point ID of the points chosen from Local Pts Job.

Match

The type of match to be made between the points. This information
is used in the transformation calculation. Position & Height, Position
only, Height only or None.

Summary of Contents for GPS900 Series
































































































































































































































































































Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands

Leica GPS900 Series, Technical Reference Manual

Search results

Summary of Contents for GPS900 Series

Reviews:

Related manuals for GPS900 Series

Brands by name

Popular brands