Leica Digilux 3 User Manual Download

Page: 46 / 136

Basic

To delete [MULTI DELETE]/
[ALL DELETE]

Press [DELETE] twice.

Press

to select

[MULTI DELETE] or
[ALL DELETE] and then press
[MENU/SET].

• If you select [MULTI DELETE], perform

steps

onwards.

• If you select [ALL DELETE], perform

steps

onwards.

• When [FAVORITE] (P90) is set to [ON],

[ALL DELETE EXCEPT

] appears. If

you select [ALL DELETE EXCEPT

perform steps

onwards. (However, if

none of the pictures have [

]

displayed, you cannot select
[ALL DELETE EXCEPT

] even if

[FAVORITE] is set to [ON].)

Press

to select the picture

and then press

to set.

(Only when selecting [MULTI DELETE])

• Repeat the above procedure.
• [DELETE] appears on the selected

pictures. If

is pressed again, the

setting is canceled.

• The icon [

] blinks red if the selected

picture is protected and cannot be
deleted. Cancel the protect setting and
then delete the picture. (P94)

Press [DELETE].

Press

to select [YES] and then

press [MENU/SET].

(Screen when selecting
[MULTI DELETE])

• [DELETE ALL PICTURES IN THE

MEMORY CARD ?] is displayed when
using [ALL DELETE] and [DELETE ALL
EXCEPT

?] is displayed when using

[ALL DELETE EXCEPT

• If you press [MENU/SET] while deleting

pictures using [ALL DELETE] or
[ALL DELETE EXCEPT

], the

deleting will stop halfway.

• Once deleted, pictures cannot be

recovered. Double-check pictures before
deleting them.

• Do not turn off the camera while deleting.
• Use a sufficiently charged battery (P19) or

the AC adaptor when deleting.

• It is possible to delete up to 50 pictures at

one time using [MULTI DELETE].

• The greater the number of pictures the

longer it takes to delete them.

• The pictures are not deleted even if you

select [ALL DELETE] or
[ALL DELETE EXCEPT

] in the

following cases.
– The Write-Protect switch on the SD

Memory Card or the SDHC Memory
Card is slid to the [LOCK] side (P23).

– The file does not conform to the DCF

standard (P44).

– The pictures are protected [

] (P94).

ALL DELETE

MULTI/ALL DELETE

CANCEL

SELECT

SET

MENU

MULTI DELETE

SET

SELECT
MARK/UNMARK

EXIT

DELETE

MULTI DELETE

MENU

SET

SELECT

MULTI DELETE

DELETE THE PICTURES
YOU MARKED?

MENU

SET

YES

Summary of Contents for Digilux 3









































































































































Search results

Summary of Contents for Digilux 3

Reviews:

Related manuals for Digilux 3

Brands by name

Popular brands

Leica Digilux 3, User Manual

Search results

Summary of Contents for Digilux 3

Reviews:

Related manuals for Digilux 3

Brands by name

Popular brands