Leica Digilux 3 User Manual Download Page 119

Page: 119 / 136

Others

119

5: The camera becomes warm.

• The surface of the camera may become

warm during use. This does not affect
the performance or quality of the
camera.

6: The clock is reset.

• If you do not use the camera for a long

time, the clock may be reset. When the
message [PLEASE SET THE CLOCK]
appears, set the clock again. (P26)

• When you take a picture before setting

the clock, [0:00 0. 0.

0] is recorded.

7: The file numbers are not recorded

consecutively.

• When you perform an operation after

taking a certain action, the pictures may
be recorded in folders with different
numbers from the ones used prior to
the operation. (P99)

8: The file numbers are recorded in

ascending order.

• If the battery is inserted or removed

when the camera is not turned off, the
recorded folder numbers are lost.
However if you turn the camera on
again and record pictures, the recorded
folder numbers are different from the
prior recorded folder numbers.

Summary of Contents for Digilux 3









































































































































Search results

Summary of Contents for Digilux 3

Reviews:

Related manuals for Digilux 3

Brands by name

Popular brands

Leica Digilux 3, User Manual

Search results

Summary of Contents for Digilux 3

Reviews:

Related manuals for Digilux 3

Brands by name

Popular brands