Leica Digilux 3 User Manual Download Page 102

Page: 102 / 136

Connecting to other equipment

102

Setting date printing, the number of
prints, the paper size and the page
layout

Select and set each item in step

• Items not supported by the printer are

displayed in gray and cannot be selected.

• When you want to print pictures in a paper

size or a layout which is not supported by
the camera, set [PAPER SIZE] or
[PAGE LAYOUT] to [

] and then set the

paper size or the layout on the printer. (For
details, refer to the operating instructions
of the printer.)

[PRINT WITH DATE]

• If the printer does not support date printing,

the date cannot be printed on the picture.

[NUM. OF PRINTS]

Set the number of prints.

[PAPER SIZE]

(Paper sizes that can be set with this unit)
The paper sizes are displayed on pages
1/2 and 2/2. Press

to select.

These items cannot be displayed when
the printer does not support the paper
sizes.

[PAGE LAYOUT]

(Layouts for printing that can be set with
this unit)

• An item cannot be selected if the printer

does not support the page layout.

DPOF picture

• Set the DPOF print setting on the

camera in advance. (P92)

Press

to select

[DPOF PICTURE] and then press
[MENU/SET].

Press

to select [PRINT START]

and then press [MENU/SET].

• You cannot select [PRINT START]

when the DPOF print setting is not set.
Select [DPOF SET] and then set the
DPOF print setting. (P92)

• Press [MENU/SET] to cancel printing.

Settings on the printer are
prioritized.

[OFF]

Date is not printed.

[ON]

Date is printed.

1/2

Settings on the printer are
prioritized.

[L/3.5

]

89 mm

127 mm

[2L/5

]

127 mm

178 mm

[POSTCARD]

100 mm

148 mm

[A4]

210 mm

297 mm

2/2

[CARD SIZE]

54 mm

85.6 mm

[10

15cm]

100 mm

150 mm

]

101.6 mm

152.4 mm

]

203.2 mm

254 mm

[LETTER]

216 mm

279.4 mm

Settings on the printer are
prioritized.

1 photo/page

2 photos/page

4 photos/page

SET

PictBridge

SET

SELECT

SINGLE PICTURE

MENU

DPOF PICTURE

SET

PRINT START
PAPER SIZE
PAGE LAYOUT
DPOF SET

DPOF

CANCEL

SELECT

SET

MENU

Summary of Contents for Digilux 3









































































































































Search results

Summary of Contents for Digilux 3

Reviews:

Related manuals for Digilux 3

Brands by name

Popular brands

Leica Digilux 3, User Manual

Search results

Summary of Contents for Digilux 3

Reviews:

Related manuals for Digilux 3

Brands by name

Popular brands