144
Shutter and Drive Settings
Using Continuous Mode
●
When the frame rate is set to [H] and if many pictures are taken, the frame rate may be reduced
during the series.
●
When the frame rate is set to [SH] or [H] (the focus mode is set to [AFS] or [MF]), and the
exposure and White Balance settings are fixed to those of the first picture.
When the frame rate is set to [H] (the focus mode is set to [AFF] or [AFC]), [M], or [L], and the
exposure and White Balance settings are adjusted individually for each still picture.
●
The frame rate may be reduced if the shutter speed is reduced in darker locations.
●
With repeated recordings, it may take a while between recordings, depending on the usage
conditions.
●
It may take a while to store still pictures that were taken using Continuous Mode. If you
continue to record while storing, the number of pictures that can be taken will be reduced.
A high-speed card is recommended when recording using Continuous Mode.
●
Continuous Mode is disabled in the following cases:
•When the picture effect (Filter) is set ([Rough Monochrome], [Silky Monochrome],
[Miniature Effect], [Soft Focus], [Star Filter], [Sunshine])
•When White Balance Bracket is set
•When using [Time Lapse Shot]
•When using [Stop Motion Animation] (only available with [Auto Shooting] setting)
•During motion picture recording
•When [4K PHOTO] is set to [ON]
•When recording using the flash
•When recording with [iHandheld Night Shot]
•During T (time) recording
•When [HDR] is set to [ON]
•When [Multi Exp.] is set
•When [Simultaneous record w/o filter] is set to [ON]
●
[SH] in Continuous Mode cannot be used In the following cases:
•When [Quality] is set to [
], [
] or [ ]
•When using [Stop Motion Animation]
Summary of Contents for D-LUX 109
Page 1: ...LEICA D LUX Instructions ...