Leica D-LUX 109 Instructions Manual Download Page 101

Page: 101 / 302

101

Picture Quality and Coloring Settings

Adjusting the Picture Quality by Adding an Effect [Photo Style]

■

Adjusting the picture quality

Press to select the type of Photo Style.

Standard

Press to select an item, and then to adjust.

[Contrast]

[+]

Increases the difference between the brighter and the

darker parts in the picture.

[–]

Decreases the difference between the brighter and the

darker parts in the picture.

[Sharpness]

[+]

Definition is enhanced.

[–]

Definition is reduced (resulting in “softer” pictures).

[Noise Reduction]

[+]

The noise reduction effect is enhanced. The resolution

may deteriorate slightly.

[–]

The noise reduction effect is reduced. The resolution can

be enhanced slightly.

[Saturation]

[+]

The colors in the picture become vivid.

[–]

The colors in the picture become subdued.

[Color Tone]

[+]

Shifts towards a bluish tone.

[–]

Shifts towards a yellowish tone.

[Filter Effect]

[Yellow] Enhances the contrast of an subject. (Effect: Weak)

The blue sky is rendered more clearly.

[Orange] Enhances the contrast of an subject. (Effect: Medium)

The blue sky is rendered more vividly.

[Red]

Enhances the contrast of an subject. (Effect: Strong)

The blue sky is rendered much more vividly.

[Green]

The skin and lips of people and green leaves appear in

natural tones.

Green leaves appear brighter and more emphasized.

[Off]

—

[Color Tone] is displayed only when [Monochrome] is selected. Otherwise, [Saturation] is

displayed.

[Filter Effect] is displayed only when [Monochrome] is selected.

•When the picture quality is adjusted, [+] will be displayed in the icon.

Press [MENU/SET].

■

Registering the setting for the adjusted picture quality to [Custom]

Perform the picture quality adjustment in Step of “Adjusting the picture quality”, and

then press [DISP].

•A confirmation screen is displayed. Select [Yes], and then press [MENU/SET].

Summary of Contents for D-LUX 109















































































































































































































































































































Search results

Summary of Contents for D-LUX 109

Reviews:

Leica D-LUX 109, Instructions Manual, Page: 101 / 302

Search results

Summary of Contents for D-LUX 109

Reviews: