Leica D-LUX 109 Page 285 Instructions Manual Download

Page: 285 / 302

285

Others

Q&A Troubleshooting

■

Flash

I cannot perform [Flash] settings.

•The flash (supplied/optional) unit is not attached properly.

→ Properly attach it to the camera. (→177, 261)

•For details about flash settings, refer to (→177 - 184, 261).

No flash is emitted.

The flash becomes unavailable in the following cases.

•When the picture effect (Filter) is set

•When the camera is set to use [Auto Bracket], White Balance Bracket, or [Aspect Bracket]

•When using [Burst]

•During panorama picture recording

•When [HDR] is set to [ON]

•When the electronic shutter is used (→140)

→ Set [Shutter Type] to [AUTO] or [MSHTR].

•When [Silent Mode] is set to [ON] (→162)

→ Set [Silent Mode] to [OFF].

The flash fires twice.

•(Except when the [Firing Mode] of [Flash] is set to [MANUAL]) When red-eye reduction (→181)

is set, the firing interval will be longer. Make sure that the subject does not move until the second

flash.

Summary of Contents for D-LUX 109















































































































































































































































































































Search results

Summary of Contents for D-LUX 109

Reviews:

Related manuals for D-LUX 109

Brands by name

Popular brands

Leica D-LUX 109, Instructions Manual

Search results

Summary of Contents for D-LUX 109

Reviews:

Related manuals for D-LUX 109

Brands by name

Popular brands